Blast mitigation film prevents flying shards of glass
This type of explosion proof window film is 323 microns thick, so it is often used in industrial settings, e.g. areas close to incinerators, storage of hazardous substances, waste processing and the vehicles used on the premises. The risk of explosions is higher than average in such spaces and vehicles. Glass is the weakest spot in buildings and vehicles, and particularly vulnerable when the air pressure becomes dangerously high (blast). If something explodes, blast mitigation film will hold the glass together, preventing injuries from flying glass shards. QE12 bomb proof glass film is formally classified in the P2A DIN EN 356 class, with certification issued by the testing laboratory for safety glass at MPA-NRW. The official certification for the explosion proof window film can be found at the bottom of this page. Protect yourself and your employees from flying splinters and shards of glass in the event of a blast.
Transparent QE12 explosion proof window film
Our bomb proof glass film is transparent and consequently does not change any aspects of visibility or daylight, either from the inside or the outside. The film does not alter the architectural features of a building, so this bomb proof glass film can be used in historic or listed buildings. Another advantage is that this blast mitigation film blocks up to 99% of harmful UV radiation, so your furnishings and belongings will not fade. This explosion proof window film is transparent and invisible on the pane. QE12 film is a very rigid kind of window film, and is extremely effective as protection against burglaries. QE12 holds the glass together so it is practically impossible for any burglar to enter the house through the glass. The glass holds together like a shield. This two-fold effect means that QE12 film is a multifunctional explosion proof window film.
The practical advantages of transparent QE12 blast mitigation film
Here is a brief list of the advantages:
• QE12 blast mitigation film is officially certified (P2A/DIN EN 356) by Germany’s MPA-NRW agency
• It is not visible on the glass, because QE12 film is transparent
• QE12 film is often used in industrial settings
• The glass holds together when broken, so there is no danger of the shards breaking loose
• QE12 blast mitigation film is easy to apply yourself
Order bomb proof window film cut to size, in a standard size or per roll
Thanks to our unique made-to-measure module, you can order QE12 blast mitigation film to be cut to size. You will find that option under the tab ‘made-to-measure’. You can order QE12 blast mitigation film to your exact measurements, down to the last millimetre. However, if you prefer to order QE12 in a standard size, you will find the options under the tab ‘standard sizes’. If you are working on a large project and would like to order a whole role of QE12, go to the tab ‘whole roll’. The tabs are on this product page.
How to apply window film
Explosion proof window film is easy to apply yourself with the aid of our special tools. A weighted squeegee is an essential piece of equipment which will help you apply your window film absolutely perfectly. We recommend using a weighted squeegee so you can apply extra pressure to the glass, which is needed due to the rigidness of the film. Bomb proof glass film should be applied to the inside of a window. It can be used on all kinds of plate glass (and on all grades of Low E glass including triple glazing). Our window film always comes with clear application instructions which explain, in a step-by-step plan, how to apply the film.
Please note: This kind of film cannot be applied to structured glass such as patterned glass and wire-reinforced glass.
* Explosion-resistant foil serves as an extra protection against an explosion. SCALASOL® can never be held liable for any personal injury / material damage with the subsequent costs.