SCALASOL® Patterned Privacy Window Film | MR20 | Ribbed Glass Effect Clear
Pros and cons
Decorative vintage (retro) reeded glass look for your home or office
Clear reeded glass effect creates an open appearance
Provides both decoration and additional privacy
The ribbed pattern looks the same on both sides of the glass
Easy to apply yourself using our recommended tools
The design may restrict the installation orientation
Not suitable for textured glass, such as patterned or wired glass
Description MR20
Short description
Reeded glass window film is a decorative privacy film that replicates the characteristic appearance of traditional reeded glass. The film has a reeded glass look that creates a retro or vintage appearance and instantly adds atmosphere and character to glass. The textured design significantly distorts the view, effectively preventing visibility from outside while still allowing daylight to pass through. This creates a perfect balance between privacy and natural light. Reeded glass film is manufactured using high-quality window film, making installation easy and comparable to standard window film. In addition to its decorative effect, this film offers a practical solution for areas where privacy is required without completely blocking out the light.
Application
Reeded glass window film is widely used in homes and commercial spaces where both privacy and appearance are important. Examples include bathrooms, toilets, kitchens, hallways and internal doors, as well as offices, consulting rooms or shops. The film is particularly suitable for glass partitions and windows where a decorative accent is desired. Thanks to its timeless reeded texture, this film complements both modern interiors and interiors with a classic or vintage style. Any glass window or partition can easily be given additional privacy and a stylish, decorative appearance with reeded glass window film.
Direction of the Reeded Pattern
-
Please note! The reeded pattern is always positioned vertically based on the height measurement you enter. The height measurement therefore always determines the direction of the pattern on the window film. For example, if you enter dimensions of 80cm wide and 100cm high, the reeds will run vertically along the 100cm height. In this example, the reeds therefore run from top to bottom along the 100cm side. We recommend taking this into account when entering your measurements.
Order MR20 window film cut-to-size, in a standard size or as a full roll
Various options
Thanks to our unique cut-to-size module, you can order MR20 reeded film cut-to-size. You will find that option under the tab 'Cut-to-size'. You can order MR20 to your exact measurements, down to the last millimetre. However, if you prefer to order MR20 in a standard size, you will find the options under the tab 'Standard size'. If you are working on a large project and would like to order a whole role of MR20 film, go to the tab 'Full roll'. The tabs are on this product page.
Application
Preparation
Before applying the MR20, you must carry out the necessary preparations. The glass should be thoroughly cleaned using SCALASOL® TO-PREPARE and the SCALASOL® glass scraper.
Application on the inside of the glass
The MR20 is applied to the interior side of the window. It is suitable for all types of flat glass, including laminated safety glass, Low-E glass, and triple glazing.
Internal Door or Glass Partition
-
For an internal glass door or partition, it does not matter which side of the glass you apply the MR20 window film to. As it is an indoor area, there is no specific side on which the film must be applied.
Application difficulty level
Very easy
Easy
Moderate
Difficult
Required Tools
The MR20 can be easily applied by yourself using our application tools. The SCALASOL® Felt Squeegee and the SCALASOL® TO-MOVE water additive are essential for a perfect application of the MR20. Before applying the window film, the glass must be thoroughly cleaned. For this, you can use our glass cleaner SCALASOL® TO-PREPARE.
SCALASOL®
Felt Squeegee
Essential €6,99 + Add
SCALASOL®
TO-MOVE
Essential €6,99 + Add
SCALASOL®
TO-PREPARE
Optional
€7,99 + Add
Technical Specifications
| |
Visible light transmission (VLT) |
80% |
 |
| |
Visible light rejection (VLR) |
20% |
 |
| |
Single glazing |
 |
|
Interior side |
| |
Double glazing |
 |
|
Interior side |
| |
Tempered glass |
 |
|
Interior side |
| |
Tinted glass |
 |
|
Interior side |
| |
Laminated glass |
 |
|
Interior side |
| |
Gas-Filled Double glazing - Low E |
 |
|
Interior side |
| |
Triple glazing |
 |
|
Interior side |
| |
Patterned glass / Textured glass |
 |
|
Not suitable |
| |
Plexiglass / Acrylic glass |
 |
|
Not suitable |
| |
Polycarbonate / Multiwall sheet |
 |
|
Not suitable |
| |
Colour: Reeded glass effect clear |
| |
Adhesion: Self-adhesive (with glue layer) |
| |
Scratch-resistant surface & easy to clean |
| |
Application: Interior side of the glass (indoor) |
| |
Warranty & Expected Lifespan |
| |
Shipping Insurance: Fully insured door-to-door transport – at no extra cost |
| |
Manufacturer’s Warranty: 2 years for vertical installation and 1 year for horizontal installation |
| |
Expected Lifespan: 10–12 years for vertical installation and 6–8 years for horizontal installation |
| |
* The indicated lifespan is an estimate and may vary depending on the specific situation and conditions. Factors such as sun exposure, ventilation, angle of installation, condition of the glass, maintenance and cleaning, and especially the method of application can all influence the lifespan. If the window film is not applied correctly, its lifespan may be significantly reduced.
|
|
 |
|
Warranty Terms Click here for the warranty terms of the MR20 |
|
The information on this page is for reference only and not legally binding. SCALASOL® reserves the right to modify the composition of its products at any time. Please refer to our warranty terms and general conditions for more information.
|