SCALASOL® Static White Frosted Window Film PP45
Pros and cons
Blocks visibility from outside while maintaining natural daylight- Incoming (day)light is diffused evenly
- Privacy during both the day and evening
- Static (no adhesive layer) / Reusable
- Easy to apply yourself using our recommended tools
Not suitable for excessively humid areas- Not suitable for textured glass, such as patterned or wired glass
Description PP45
Short description
Once the static frosted glass film has been applied, its colour closely resembles that of frosted glass. The PP45 has a matte white colour. This is the colour most commonly used in the glass industry to prevent visibility from outside. Thanks to its subtle colour, the PP45 rarely affects the architecture of a building. The matte finish of the film creates a pleasant distribution of natural light. Light enters through the film in a scattered manner, also known as diffused light. In addition to providing privacy, the PP45 also offers 22% glare reduction. This means that the static frosted glass film significantly improves visibility on computer screens or televisions, for example, when sunlight shines on the glass.
Application
Static frosted glass window film is used in areas where privacy is required. Examples include bathrooms, toilet windows, offices, hospitals, etc. As the PP45 allows light to pass through, the room will not become darker. You can expect visibility and shadows to disappear completely at a distance of 15-20 cm from the window. Even when it is dark outside and the lights are on inside, the PP45 static frosted glass film continues to prevent visibility from outside.
Cleaning
For cleaning window film, we recommend using SCALASOL® TO-CLEAN. This specially developed window film cleaner can be used in combination with a soft cloth or window squeegee. Avoid harsh chemicals such as ammonia or bleach, as these can damage the film. Instead, use a mild cleaning agent or a diluted solution of water with a small amount of dishwashing liquid.
Order PP45 window film cut-to-size, in a standard size or as a full roll
Various options
Thanks to our unique cut-to-size module, you can order PP45 white frosted film cut-to-size. You will find that option under the tab 'Cut-to-size'. You can order PP45 to your exact measurements, down to the last millimetre. However, if you prefer to order PP45 in a standard size, you will find the options under the tab 'Standard size'. If you are working on a large project and would like to order a whole role of PP45 film, go to the tab 'Full roll'. The tabs are on this product page.
Application
Preparation
Before applying the PP45, you must carry out the necessary preparations. The glass should be thoroughly cleaned using SCALASOL® TO-PREPARE and the SCALASOL® glass scraper.
Application on the inside of the glass
The PP45 is applied to the interior side of the window. It is suitable for all types of flat glass, including laminated safety glass, Low-E glass, and triple glazing.
Application difficulty level
Very easy- Easy
- Moderate
- Difficult
Required Tools
The PP45 can be easily applied by yourself using our application tools. The SCALASOL® Felt Squeegee and the SCALASOL® TO-MOVE water additive are essential for a perfect application of the PP45. Before applying the window film, the glass must be thoroughly cleaned. For this, you can use our glass cleaner SCALASOL® TO-PREPARE.
SCALASOL®
Felt Squeegee
Essential €6,99 + Add
SCALASOL®
TO-MOVE
Essential €6,99 + Add
SCALASOL®
TO-PREPARE
Optional
€7,99 + Add
Technical Specifications
| |
Visible light transmission (VLT) |
52% |
 |
| |
Visible light rejection (VLR) |
48% |
|
| |
* The light measurements (VLT & VLR) were performed using laboratory equipment and are based on monochromatic light. However, it is important to emphasise that these results should be interpreted differently in practical use. Therefore, below we provide a realistic indication of light transmission in practical applications on a bright, sunlit summer day.
|
|
| |
Visible Light Transmission (52% VLT) indication |
|
Bright, sunlit summer day |
|
|
Average bright daylight |
|
|
Daylight on an overcast summer day |
|
|
Fully overcast winter day |
|
|
Twilight |
|
| |
Reflection of external visible light |
26% |
|
| |
Reflection of internal visible light |
26% |
|
| |
Reduction of Infrared Radiation |
62% |
|
| |
Transmission of Infrared Radiation |
38% |
|
| |
Solar energy transmission |
48% |
|
| |
Total solar energy rejected |
52% |
|
| |
Single glazing |
|
|
Interior side |
| |
Double glazing |
|
|
Interior side |
| |
Tempered glass |
|
|
Interior side |
| |
Tinted glass |
|
|
Interior side |
| |
Laminated glass |
|
|
Interior side |
| |
Gas-Filled Double glazing - Low E |
|
|
Interior side |
| |
Triple glazing |
|
|
Interior side |
| |
Patterned glass / Textured glass |
|
|
Not suitable |
| |
Plexiglass / Acrylic glass |
|
|
Not suitable |
| |
Polycarbonate / Multiwall sheet |
|
|
Not suitable |
| |
Adhesion: Static-cling (no glue layer) |
| |
Scratch-resistant surface & easy to clean |
| |
Application: Interior side of the glass (indoor) |
| |
Warranty & Expected Lifespan |
| |
Shipping Insurance: Fully insured door-to-door transport – at no extra cost |
| |
Manufacturer’s Warranty: 2 years for vertical installation and 1 year for horizontal installation |
| |
Expected Lifespan: 8–10 years for vertical installation and 2–3 years for horizontal installation |
| |
* The indicated lifespan is an estimate and may vary depending on the specific situation and conditions. Factors such as sun exposure, ventilation, angle of installation, condition of the glass, maintenance and cleaning, and especially the method of application can all influence the lifespan. If the window film is not applied correctly, its lifespan may be significantly reduced.
|
|
|
The information on this page is for reference only and not legally binding. SCALASOL® reserves the right to modify the composition of its products at any time. Please refer to our warranty terms and general conditions for more information.
|
Static Adhesion
